The station allows users to read-out, save and evaluate data stored in SportIdent finger-sticks. Auto-on behaviour when any SI-Card (finger-stick) is inserted. Integrated RS232 interface with DB9 connector. Cable length of 1.5m Internal backup memory up to 1022 SI-Cards Print results function with automatic sort into different courses Custom print layout of header, footer and code-number translation is possible using software SI-Print Internal lithium battery works 4 to 7 years. http://www.sportident.ca/archive/2010/02/02/what-the-printer-control-does.aspx Click here for an article on what this device can do.
The SI-Master BS8-D is an extended SI control. In addition to being able to be programmed by you like any other control, it can also be used as a Time Master, and as an Extended Time Master. A Time Master allows the quick setting of the real-time clocks in other controls. As Extended Time Master it additionally clears the backup memory of the other controls. See the downloads section below for more info.
The BSF8 Timing Control comes as either a "display top" (DT) unit or a "display bottom" (DB) unit. This distinction refers to the location of the LCD readout on the control - either on the top or the bottom of the unit. In general, if a control is to have a control code sticker on its top surface, the "display bottom" unit is recommended. The DB unit is available in blue or red. The DT unit is available in blue only.
Main station with USB interface to computer. Allows programming of controls and downloading of finger-stick information See the downloads section below for a document describing the features of this control.
Download station with USB interface to computer. Allows programming of controls and downloading of finger-stick information. This unit does not contain an internal battery, it is powered by the USB port. It features very low power consumption, the laptop battery will not be stressed. The unit will retain all downloads even if the unit is unplugged for a while.